GE RSDetection RS-S131-200-ER0000 User Manual page 52

RSDetection
User's Manual
Measurement
DaqAirPressure
HighVoltage
HighVoltageStdDev
DatabaseFileSize
DatabaseRecordCount
WindSpeed
WindDirection
RainAccumulation
AirPresure
AirTemperatue
Humidity
* DESIGNATES THE DEFAULT UNIT IF MORE THAN 1 UNIT CAN BE SELECTED.
March 2016
Page 38
Measurement Description
Pressure measured on the DAQ board. Due to the
sealed nature of the enclosure this may not
accurately reflect the exterior pressure.
The bias voltage applied to the HPIC
The bias voltage standard deviation as measured
since the last measurement.
Current size of the SQL database file.
The number of measurements stored in the
database.
Wind speed as measured by the option metrological
sensor. Will be zero if no sensor installed.
Wind direction as measured by the optional
metrological sensor. If the sensor is not installed, a
value of zero will be recorded.
Rainfall as measured by the optional metrological
sensor. This measurement will be reset to zero after
every measurement. If the sensor is not installed, a
value of zero will be recorded.
Air pressure as measured by the optional
metrological sensor. If the sensor is not installed, a
value of zero will be recorded.
Air temperature as measured by the optional
metrological sensor. If the sensor is not installed, a
value of zero will be recorded.
Humidity as measured by the optional metrological
sensor. If the sensor is not installed, a value of zero
will be recorded.
g
Unit(s)
bar (*)
kP
psi
volts
volts
bytes
Record
Count
m/s (*)
k/h
mph
degrees
mm (*)
Cm
inches
bar (*)
kPa, psi,
mmHg, inHg
°C (*)
°F
bar (*)
kPa, psi,
mmHg, inHg
S131-200-UM Rev A