GE RSDetection RS-S131-200-ER0000 User Manual page 47

g
Event
OperatingMode
SystemStartup
NetworkStatus
Date/Time Set
ConfigurationChange
MetStationStatus
DoseRateHighAlarm
DoseRateLowAlarm
Copyright © 2016 General Electric Company. All Rights Reserved
Event Description
Indicates the current
operating mode. No
action is taken by the
system to a state
change other than
logging and
notification. It is up to
the user to take action
on this event state.
During startup the unit
will be in initialization
mode followed by
SystemStarted. This
event can be used to
determine when power
was cycled or the unit
restarted.
Reflects the current
connection to the
TCP/IP network.
Whenever the
date/time is set this
event is toggled.
Set when any
configuration
parameter is changed.
The current state of
communication with
the meteorological
station.
If the dose rate exceeds
the alarm limit
specified in the event
configuration this event
will generate an alarm.
If the dose rate is lower
than the alarm limit
specified in the event
configuration this event
will generate an alarm.
RSDetection
User's Manual
State
Normal
Offline
CheckSource
SystemInitializing
SystemStarted
Connected
Disconected
DateTimeSet
ConfigurationChange
MetStationOK
MetStationOffline
MetStationError
NoAlarm
AlarmActive
NoAlarm
AlarmActive
S131-200-UM Rev A
Page 33