GE RHM 160 Specifications

GE
Measurement & Control
RHM 160
Coriolis Mass Flowmeter for
Very High Flow Applications
The RHM 160 can measure flow rates up to 1800 t/h
(66,140 lb/min) with pressures up to 50 bar. This large
sized model is optimal for loading and unloading
applications - manufactured by GE's Rheonik mass
flowmeter experts.
Applications
• Loading of boats, vessels, rail tank wagons
• Oil exploration
• Highly viscous media (low pressure drop and
excellent performance at low flow conditions)
Features
• Suitable for pressure up to 50 bar
• Flow uncertainty down to 0.15%
• Density uncertainty down to 0.5%
• Repeatability better than 0.05%
• Unique torsion oscillator
• Typical measuring ranges from 750 to
30000 kg/min
• Minimal flows as low as 600 kg/min
Advantages
• High flow rates for fast filling
• Torsion oscillator design assures most stable and
basically drift free measurement and increased
signal to noise ratio
• Not sensitive to changes in pressure
• Longest life time and increased safety (low stress
in welds and increased wall thickness against
abrasion)
• No moving parts, practically no maintenance