Modbus (Rs485) Parameters; Modbus/Tcp Parameters - GE DigitalFlow DF868 Programming Manual

MODBUS (RS485)
Parameters

MODBUS/TCP Parameters

Programming Site Data
If your DF868 does not include an option card for MODBUS
communications, you have completed programming the COMM
submenu. However, if you have installed a MODBUS option card, the
following additional prompts appear.
[F1]-[F4]
1. Press to select the desired MODBUS Baud Rate from four
selections: 2400, 4800, 9600 and 19,200.
[F1]-[F3]
2. Press to set the MODBUS Parity as none, odd or even.
[F1]
3. Press to select one MODBUS Stop Bit, or
stop bits.
4. Use the numeric keys to enter a MODBUS Address (from 1 to 247)
[ENT].
and press
COMM
Programming of the
leave the User Program, press
any of the submenus, the following screen appears:
PROGRAM
Do you want to SAVE
current selection appears here
No Yes
Note: See the
SAVE
submenu section on page 1-52 of this chapter for
more information on this function.
If your DF868 does not include an option card for MODBUS/TCP
communications, you have completed programming the
submenu. However, if you have installed a MODBUS/TCP option
card, you must complete the following steps:
[F3]
1. Press to select the appropriate MODBUS Baud Rate of 9600.
[F1]-[F3]
2. Press to set the MODBUS Parity as none, odd or even.
[F1]
3. Press to select one MODBUS Stop Bit, or
stop bits.
4. Use the numeric keys to enter a MODBUS Address (from 1 to 247)
[ENT].
and press
COMM
Programming of the
leave the User Program, press
any of the submenus, the
[F1]
to return to measurement mode without saving the file or press
[F2] SAVE
to enter the submenu and save the file.
[F2]
submenu has now been completed. To
[EXIT]
. If changes have been made in
Start
At the User Program screen
shown, press
measurement mode without
saving the file or press
SAVE
enter the
[F2]
submenu has now been completed. To
[EXIT]
. If changes have been made in
SAVE
screen (shown above) appears. Press
March 2008
to select two
[F1]
to return to
[F2]
to
submenu.
COMM
to select two
1-47