Figure 15 Application Configuration Screen - GE RSDetection RS-S131-200-ER0000 User Manual

Hide thumbs

Table Of Contents

Table of Contents



Application Configuration – There are configurable parameters used to

control the overall utility application. When selected, a dialog box similar to

Figure 15 will be displayed. There are 3 configurable items listed that are

default file folders for storing data:



DefaultConfigurationFolder - The next section describes saving and restoring

configurations. This folder will be used as the default location for this function.



DatabaseHistoryFolder - In a number of functions there is an option to save

data to a file. (For example the History Tab )In those cases the file dialog box

used to specify where the data will be saved defaults to the folder specified in

this dialog.



LiveLoggingFolder - In the plotting tab data can be logged to a file as it is

received. This folder will be used as the location for this data to be stored.



Save Unit Configuration – There are many configuration options available and

these are described in detail in the Configurations Tab section of the manual.

Using this menu item, the configuration of the unit can be saved to a file. This

file could then be used at a later time to restore the configuration. When

selecting this item the File dialog box displays to allow for selecting a location

and file name for the configuration. The default folder is determined by the

application configuration options described in the prior section. The format of

the data storage is an XML text-based file.



Restore Unit Configuration –The configuration of the unit can be restored

from a file previously saved using the Save Configuration function in the

previous section. When selecting this item, the File dialog box displays to allow

for selecting a location and file name for the configuration. The default folder is

determined by the application configuration options described in the prior

section. The format of the data storage is an XML text-based file.



Exit –Exits the application and closes the connection with the unit.