Configuring Network Settings - Spectra Logic T-Series Spectra T24 User Manual

Configuring Network Settings

1. If not already logged in, log in to the RLC as Admin.
2. Select Configuration > Network; the Network Configuration screen appears
(Figure 4-4).
Figure 4-4 The Network Configuration screen, showing DHCP addressing enabled.
Enabling DHCP
1. Check the box next to DHCP Address.
When DHCP addressing is enabled, the fields for IP Address, Network Mask,
and Gateway are grayed out.
2. Select Submit.
3. In the pop-up window that asks Are you sure?, select OK.
Setting an IP Address
1. Uncheck the box next to DHCP Address to disable DHCP addressing.
2. Fill in the fields for IP Address, Network Mask, and Gateway.
3. Select Submit.
4. In the pop-up window that asks Are you sure?, select OK.
5. As noted at the bottom of the screen, restart the RLC by pointing your Web
browser to the new IP address.
Chapter 4. Configuring the Library
34