Directed Directechs DS4+ Installation Manual page 41

Quick Reference Guide
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,
there are 3 possible ways you can send commands to your vehicle, using the:
• Factory remote.
• Aftermarket remote.
• Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3
times quickly on your factory remote.
Vehicle takeover
NO vehicle takeover available for push-to-start models. The engine will stop when a
door is opened.
Wait at least 2 seconds before restarting the engine or an error message can appear
in the vehicle information display.
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the
1
gear in Park (P).
Press the Remote Start button on the transmitter.*
2
The parking lights will flash once to indicate the
vehicle is now in Pit Stop Mode.
Key-type vehicles: Turn ignition OFF. Remove the key
3
from the ignition barrel.
It is safe to leave the engine running and exit the
vehicle with the factory remote or key in hand.
4
Note: We recommend that you always lock the
doors of your vehicle when leaving it unattended.
* Icon and remote appearance may differ depending on the model purchased.
List of available commands
Note that the information below is for many Viper, Clifford, Python, Avital and
Automate models. Icons and commands may differ depending on the model and
options purchased. Refer to your authorized installation center for more specific
information.
Button(s)
* Icon and remote appearance may differ depending on the model purchased.
SmartStart compatible
This system is equipped with a Bluetooth version of SmartStart offering up to 200' of
Put
range. The simple graphical interface gives you control over the following features of
gear in
Park
your installed remote start system or security with remote start system:
• Lock/Arm
• Unlock/Disarm
14:36
&
• Remote Car Starter
Parking lights flash x1
Press Remote
Start button*
• Trunk Release
• Panic
Key OUT Key IN
• AUX Channels
START START
You can also control multiple vehicles – great for families – and assign more than
one user to control a vehicle. It's easy with SmartStart! But, this is only the beginning!
14:36
SmartStart is loaded with additional features including GPS tracking, SmartSchedule,
Exit vehicle
vehicle status, roadside assistance, parked car finder and more.
with remote
The application enables a "Cloud-Connected Car" like never before, providing
2-way interaction with your vehicle. Connectivity is managed through the Directed
Cloud Services (DCS) network linking car, app, end user, and the Internet.
For more information, visit www.mysmartstart.com.
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote start.
*
* Press & hold for 5 seconds to activate the trunk release (optional).
Key IN Key IN
START START
DS4+ HONDA7
© 2017-06-21 Directed. All rights reserved.