Directed Directechs DS4+ Installation Manual page 32

T-Harness modification procedure
In some cases the OEM keyless will not
operate during a remote start condi-
tion. To regain functionality of the
OEM keyless, CUT and tape the White
wire (pin 5) of the Black 12-pin
connector.
Key2GO
This feature may be required if the interface does not program using the traditional method. Refer to "Module programming" on
page 34 for more information.
Key2GO has been designed and developed to bypass the advanced encryption layers found in modern vehicles. It uses an array
of servers to generate a duplicate of the original key, allowing the installation of a remote starter without having to give up a key.
The advantage is that this feature allows you to use one original key and the server to configure the bypass in the vehicle.
All Key2GO-compatible firmware are clearly indicated in the function list of each vehicle search result page and will also appear
on the flash page. Any first-time user must re-register to gain access to Key2GO, and some additional information will be required
to complete the registration process, such as your Directed account number and store name.
Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application.
Refer to "Module programming" on page 34 of this guide for instructions on how to program features using Key2GO.
Configuring the system
Important!
Once the DS4+ module is installed in the vehicle following the instructions in "Installation" on page 8, launch the DirectLink
application on your mobile device, and select Configure DS4/DS4+. Follow the on-screen instructions to configure the system.
Note: Your system can also be configured using XKLoader2 on www.directechs.com.
32
DS4+ HONDA7
© 2017-06-21 Directed. All rights reserved.