Control Through Arduino Microcontroller - RHINO RMCS –2303 Operating Manual

Control through Arduino Microcontroller

RMCS2303 drive can be controlled by any microcontroller, PLC or PC software capable of communicating on
ASCII Modbus protocol. Following section shows how to use provided library for Arduino microcontroller.
Hardware Connection:
DRIVE-ARDUINO MEGA CONNECTION
DRIVE-ARDUINO UNO CONNECTION
DRIVE
GND
RXD TXn (n=1,2,3 for Arduino mega2560)
TXD RXn (n=1,2,3 for Arduino mega2560)
DRIVE
GND
RXD D3(Software Serial Tx)
TXD D2(Software Serial Rx)
https://www.robokits.co.in/
ARDUINO
GND
ARDUINO
GND
29 | P a g e