Table of Contents
Advertisement
COM port Selection
Select COM Port for USB-UART, then click on
You may look in 'Devices and Printers' or 'Device Manager' for specific serial port of your device. The
software supports serial ports up to COM32 only. If your device's port number is higher you can change it in -
Device Manager > Ports (COM & LPT) > Double click on device name > Port Settings > Advanced > COM
Port number
Once your drive is connected to COM Port and it shows "Connected" message.
When the drive communicates with software You can see a blinking Green indication.
"Connect"
button.
https://www.robokits.co.in/
12 |
P a g e
Hide quick links:
Advertisement
Table of Contents
