Top cover replacement
Use this information to remove and install the top cover.
Remove the top cover
Use this information to remove the top cover.
"Read the
"Power off
"ATTENTION:
installation
the server for
Static Sensitive Device
Guidelines" on
this task" on
Ground package before opening"
page 79
page 11
on page 82
Note: You can remove or install a hot-swap fan without powering off the server, which helps you avoid
significant interruption to the operation of the system.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
To remove the top cover, complete the following steps:
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku:
http://list.youku.com/albumlist/show/id_52222446.html
.
Chapter 3
Hardware replacement procedures
89