System board jumpers
The following illustration shows the location of the jumpers on the system board of your server.
Important:
• Before you move any jumpers, turn off the server; then, disconnect all power cords and external cables.
Do not open your server or attempt any repair before reading and understanding the following information:
–
http://thinksystem.lenovofiles.com/help/topic/safety_documentation/pdf_files.html
– "Handling static-sensitive devices" on page 82
• Any system-board switch or jumper block that is not shown in the illustrations in this document are
reserved.
Figure 17. System board jumpers
ThinkSystem SR635 Maintenance Manual
26