Table of Contents
Advertisement
Figure 100. Riser assembly installation
According to the configuration, you may also need to install the rear wall bracket between the two
riser assemblies.
Figure 101. Rear wall bracket installation
After installing the riser card, complete the parts replacement. See "Complete the parts replacement" on
page 203.
PCIe adapter replacement
Use this information to remove and install a PCIe adapter.
The PCIe adapter can be an Ethernet adapter, a host bus adapter (HBA), a PCIe RAID adapter, a PCIe
interposer adapter, a PCIe solid-state drive, a PCIe GPU, and any other supported PCIe adapters.
Notes:
• Depending on the specific type, the PCIe adapter might look different from the illustrations in this topic.
.
Chapter 3
Hardware replacement procedures
121
Advertisement
Table of Contents
