Table of Contents
Advertisement
Figure 177. PIB board installation
Step 1.
Gently hold and lower the PIB board into the system board tray.
Step 2.
Install the five screws to secure the PIB board.
After installing the PIB board:
1. Connect all the cables from the PIB board. See "Power/Sideband cable routing" on page 28.
2. Push the power supplies into the bays until they click into place.
3. Complete the parts replacement. See "Complete the parts replacement" on page 203.
System board replacement
Use this information to remove and install the system board.
S017
CAUTION:
Hazardous moving fan blades nearby.
S012
CAUTION:
Hot surface nearby.
Remove the system board
Use this information to remove the system board.
.
Chapter 3
Hardware replacement procedures
193
Advertisement
Table of Contents
