Planet Networking & Communication IVR-100 User Manual page 42

Next
Previous
Cancel
Mode 2 -- DHCP Client
Select DHCP Client to obtain IP Address information automatically from your ISP. The setup is shown in
Figure 4-11.
Step 3: Security Setting
Set up the Security Settings as shown in
Press this button for the next step.
Press this button for the previous step.
Press this button to undo any changes made locally and revert
to previously saved values.
Figure 4-11: WAN Interface Setup – DHCP Setup
Figure 4-12.
Figure 4-12: Setup Wizard –Security Setting
- 42 -
Industrial 5-Port 10/100/1000T VPN Security Gateway
IVR-100