4.
Set the Active as enable.
5.
Input the Tunnel Name and select Interface.
6.
Input the Local Network and Netmask as the Gateway's LAN IP address.
7.
Input the Remote Host/IP Address as another Gateway's public WAN IP address.
8.
Input the Remote Network and Netmask as another Gateway's LAN IP address.
9.
Input the Preshare Key as the same as the one set on both Gateways.
10. Set the IKE Setting. It should be the same as the other Gateway.
11. Click Apply Settings button to save changes.
12. Go back to the VPN -> IPsec page. The status shows Connected.
Industrial 5-Port 10/100/1000T VPN Security Gateway
- 73 -
IVR-100