Planet Networking & Communication IVR-100 User Manual page 40

Start IP Address
Maximum DHCP Users
Next
Cancel
Step 2: WAN Interface
The Gateway supports two access modes on the WAN side shown in
By default, the start IP address is 192.168.1.100.
Please do not set it to the same IP address of the Gateway.
By default, the maximum DHCP users are 101, which mean the
Gateway will provide DHCP client with IP address from 192.168.1.100
to 192.168.1.200 when the start IP address is 192.168.1.100.
Press this button to the next step.
Press this button to undo any changes made locally and revert to
previously saved values.
Figure 4-8: Setup Wizard – WAN 1 Configuration
- 40 -
Industrial 5-Port 10/100/1000T VPN Security Gateway
Figure 4-8
IVR-100