Planet Networking & Communication IVR-100 User Manual page 82

Please refer the steps to configure the VPN settings of the VPN Gateway:
1. Connect the VPN Gateway to internet by the Wizard.
2. Go to the System -> Status page to check the WAN IP address. Make sure the VPN
Gateway gets public IP address successfully.
3. Go to the VPN -> L2TP page. Set the L2TP Server as enable, input the Server IP Address as
the VPN Gateway's public WAN IP address and other necessary information.
Industrial 5-Port 10/100/1000T VPN Security Gateway
- 82 -
IVR-100