Routing - Planet Networking & Communication IVR-100 User Manual

4.5.4 Routing

Please refer to the following sections for the details as shown in
Routing tables contain a list of IP addresses. Each IP address identifies a remote router (or other
network gateway) that the local router is configured to recognize. For each IP address, the routing table
additionally stores a network mask and other data that specifies the destination IP address ranges that
remote device will accept.
Object
Type
Destination
Net Mask
Industrial 5-Port 10/100/1000T VPN Security Gateway
Figure 4-23: Routing table
Figure 4-24: Routing setup
There are two types: Host and Net.
When the Net type is selected, user does not need to input the
Gateway.
The network or host IP address desired to access.
The subnet mask of destination IP.
- 53 -
Figures 4-23 and 24.
Description
IVR-100