Planet Networking & Communication IVR-100 User Manual page 41

Mode 1 -- Static IP
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will
need to enter the IP Address, Netmask, Default Gateway and DNS Server provided to you by your
ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets
separated by a dot (x.x.x.x). The Gateway will not accept the IP address if it is not in this format. The
setup is shown in Figure
Object
IP Address
Netmask
Default Gateway
DNS Server
Figure 4-9: Setup Wizard – WAN 2 Configurations
4-10.
Figure 4-10: WAN Interface Setup – Static IP Setup
Enter the IP address assigned by your ISP.
Enter the Netmask assigned by your ISP.
Enter the Gateway assigned by your ISP.
The DNS server information will be supplied by your ISP.
Industrial 5-Port 10/100/1000T VPN Security Gateway
Description
- 41 -
IVR-100