Wan - Planet Networking & Communication IVR-100 User Manual

4.5.1 WAN

This page is used to configure the parameters for Internet network which connects to the WAN port of
the Gateway as shown in
value of WAN access type.
Object
WAN Access Type
Figure 4-20. Here you may select the access method by clicking the item
Figure 4-20: WAN
Please select the corresponding WAN Access Type for the Internet,
and fill out the correct parameters from your local ISP in the fields
which appear below.
Select Static IP Address if all the Internet ports' IP
information is provided to you by your ISP (Internet
Service Provider). You will need to enter the IP
address, Netmask, Gateway, and DNS Server provided
to you by your ISP.
Static Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by
a dot (x.x.x.x). The Gateway will not accept the IP
address if it is not in this format.
IP Address
Enter the IP address assigned by your ISP.
- 50 -
Industrial 5-Port 10/100/1000T VPN Security Gateway
Description
IVR-100