Ferno Customer Relations; Ferno Technical Support - Ferno 101-H User Manual

Ferno Technical support

Customer service and product support are important aspects of each
Ferno product. Please have the product serial number available
when calling, and include it in all written communications. For
technical support questions:
Telephone (Toll-free)
Telephone
Email

Ferno Customer relations

For ordering assistance or general information:
CanaDa anD THe U.s.a.
Telephone (Toll-free)
Telephone
Fax (Toll-free)
Fax
Internet
all OTHer lOCaTiOns
For assistance or information, please contact your Ferno distributor.
If you do not have a Ferno distributor, please contact Ferno
Customer Relations:
Ferno-Washington, Inc.
70 Weil Way
Wilmington, Ohio 45177-9371, U.S.A.
Telephone
Fax
Internet
Disclaimer
This manual contains general instructions for the use, operation
and care of this product. The instructions are not all-inclusive. Safe
and proper use of this product is solely at the discretion of the
user. Safety information is included as a service to the user. All
other safety measures taken by the user should be within and under
consideration of applicable regulations. It is recommended that
training on the proper use of this product be provided before using
this product in an actual situation.
Retain this manual for future reference. Include it with the product
in the event of transfer to new users. Additional free copies are
available upon request from Customer Relations.
2
1.800.733.3766 ext. 1010
1.937.382.1451 ext. 1010
quality.products@ferno.com
1.877.733.0911
1.937.382.1451
1.888.388.1349
1.937.382.1191
www.ferno.com
+1.937.382.1451
+1.937.382.6569
www.ferno.com
© Copyright Ferno-Washington, Inc. All Rights Reserved.
Model 101-H Operating Table
Serial Number _________________________
Location: On cover holder for 101-H Base
To request additional free users' manuals,
contact Ferno Customer Relations, your
Ferno distributor, or visit www.ferno.com.
Proprietary notice
The information disclosed in this manual is the property of Ferno-
Washington, Inc., Wilmington, Ohio, USA. Ferno-Washington, Inc.
reserves all patent rights, proprietary design rights, manufacturing
rights, reproduction use rights, and sales use rights thereto, and
to any article disclosed therein except to the extent those rights
are expressly granted to others or where not applicable to vendor
proprietary parts.
limited Warranty statement
The products sold by Ferno are covered by a limited warranty,
which is printed on all Ferno invoices. The complete terms and
conditions of the limited warranty, and the limitations of liability
and disclaimers, are also available upon request by calling Ferno at
1.800.733.3766 or 1.937.382.1451.
© Ferno-Washington, Inc 234-1994-03 October 2010
Users' ManUal