Ferno s.r.l. at: to shares owned by the supplier. It is prohibited to reproduce this Telephone (from Italy) 800 501 711 manual, either in full or in part, without the prior consent of Ferno s.r.l.. Telephone (+39) 0516860028 E-mail info@ferno.it...
The accessories described have been tested and used with the Tirol Kit. You can nd them listed below: validated for use with the listed basket stretchers. Ferno s.rl. does not take any responsibility or...
Tirol Kit 2. TRAINING AND SKILLS OF OPERATORS 2.1 Skills e Tirol Kit must be used by trained and quali ed personnel and for professional use only by a minimum of Operators who use the stretcher must: two quali ed operators. More operators may be required have experience in the speci c eld of handling and depending on local protocols.
Fax +39 0518681508 4. CONFIGURATION OF THE TIROL KIT e Tirol Kit can be con gured in di erent ways according to the chosen handle xing system and to the compatible basket stretcher on which it is mounted on: Tirol Kit for Titan-Ti basket stretcher with welded Plates (REF: 21-0120-023)
4.2 Initial setup of the Tirol Kit Adapter (only for REF: 21-00034 and REF: 21-00035) e Tirol Kit Adapter is available in 2 di erent versions according to the stretcher on which it has to be mounted on: PN: 25-00082...
TAPERED basket stretchers 3. Slightly screw them in in the circled holes using the Components appropriate 4 mm Allen wrench so that the two Tirol Kit Adapter plates are connected but some backlash between the them can still be possible.
Tirol Kit 2 1mm-thick shims for Tirol Kit Adapter plates Important 2 UNI 5931 A4/80 M5x25 Hexagon socket head cap screws 2 UNI 59531 A4/80 M8x50 Hexagon socket head cap Shouldn’t the Tirol Kit Adapter plate assembly screws adhere rmly to the tubes of the stretcher even after...
6. Place the Tirol Kit Handle Adjustment Sha against the inner side of the welded plate so that the yellow line is at the top and the red one at the bottom.
5. Screw it in place with the 8 M8x35 hexagon socket head Important screws. To allow the Tirol Kit with Tirol Kit Adapter to be compatibile also with the Titan-Ti basket stretcher with welded plates, Ferno includes in the supplied material...
To mount the handles make sure that the basket stretcher handle adjustment shafts or the Tirol kit Adapter with the handle adjustment shafts. To mount the handle, disengage the pin by pressing the red button and pulling it outwards.
* PERIODIC maintenance: the accessories have to be subjected to a yearly maintenance operation by Ferno quali ed technicians. * PREVENTIVE checks: preventive maintenance operations are to be carried out by the user, as speci ed in the table below.
Disinfect and clean the device before applying the lubricant. cycle. Do not use bleach or other aggressive products. ere are two areas of lubrication in the Tirol Kit: 5. Remove the Shoulders Supports from the bag and leave them out to dry. Do not put in a tumble dryer.
Page 33
Ferno Titan basket stretchers 10-2916-001 Backpack harness for Compatible with the Titan-Ti and Tirol Kit Tirol Kit and the Titan- Ti cod. 11-0119SL, 11-0119TIROL TIROL KIT BAG PLUS Tirol Kit Bag Plus Compatible with the Tirol Kit and the Titan- Ti cod.
Ferno’s products are guaranteed against manufacturing months from the date of repair. is warranty applies only defects for a period of 24 months from the date on the Ferno when the product is used according to the instructions in s.r.l. shipping document.
Any complaints must be communicated to the reseller, or to cover the transport costs for sending or returning the Ferno s.r.l. ’ s Customer Service, within 5 days of receipt of the product. product or of discovery of the alleged defect.