Related Manuals for Ferno 103
Summary of Contents for Ferno 103
- Page 1 FERNO ® Users’ Manual Mortuary Model 103 Combination Table Read this Manual August 2009 GLO and Retain for Pub. No. 234-0037-05 Future Reference...
-
Page 2: Ferno Customer Relations
1.937.382.1191 Internet www.ferno.com all OTher lOCaTiOns For assistance or information, please contact your Ferno distributor. If you do not have a Ferno distributor, please contact Ferno Customer Relations: Ferno-Washington, Inc. 70 Weil Way Serial Number _________________________ Wilmington, Ohio 45177-9371, U.S.A. -
Page 3: Table Of Contents
4.1 Attach the Lower Rails And Table Ends _______ 8 Training Record ______________________________ 15 Maintenance Record ___________________________ 15 4.2 Attach Frame Braces ______________________ 8 4.3 Attach the Table Top ______________________ 9 4.4 Remove the Ratchet Pins __________________ 9 © Ferno-Washington, Inc 234-0037-05 August 2009... -
Page 4: Safety Information
The symbols defined below are used on the table and in which, if not avoided, could result in injury or death. this users’ manual. Ferno uses symbols recognized by the International Standards Organization (ISO), American National Standards Institute (ANSI) and the mortuary Warning services industry. -
Page 5: Safety And Instruction Labels
● practice with the table before using it with a body. ● record their training information. A sample training ● record sheet is provided on page 15. © Ferno-Washington, Inc 234-0037-05 August 2009... -
Page 6: About The Table
3 - abOUT The Table 3.1 Description Warning The Model 103 Combination Table (called the table in this improper use of the table can cause injury. Use manual) is a mortuary-service product designed to provide the table only for the purpose described in this an adjustable surface for embalming, transfer, and dressing. -
Page 7: Components
Model 103 Combination Table About the Table 3.3 Components Trough Table Top Ratchet Drain Control Bar (Each End) Wheel Swivel Lock (4) © Ferno-Washington, Inc 234-0037-05 August 2009... -
Page 8: Setup
Use a #2 Phillips screwdriver to attach the four frame braces to the lower rails and corner posts using the Phillips eight Phillips pan-head screws provided (Figure 2). Pan-Head Screw Figure 2 - Attaching the Frame Braces © Ferno-Washington, Inc 234-0037-05 August 2009... -
Page 9: Attach The Table Top
(Figure 4). Inspect the table before placing the table in service. See Inspecting the Table, page 12. Figure 4 - Remove the Four Pins © Ferno-Washington, Inc 234-0037-05 August 2009... -
Page 10: Using The Table
(2) Turn the remaining two wheels perpendicular to the long sides of the table and lock them. Figure 6 - Configuring the Casters To Hold the Table Stationary © Ferno-Washington, Inc 234-0037-05 August 2009... -
Page 11: Adjusting The Height Of The Table Top
If keeping the table level, move to the opposite end of the table and repeat Steps 1-4. Figure 8 - Grasp the Center of the Ratchet Control Bar When Lowering the Table Top © Ferno-Washington, Inc 234-0037-05 August 2009... -
Page 12: Maintenance
When using maintenance products, follow the manufacturers’ directions and read the manufacturers’ material safety data Minimum sheets. You can purchase a recommended disinfectant from Maintenance intervals your Ferno distributor or Ferno Customer Relations (page 2). • Disinfecting (this page) 6.2 Disinfecting and Cleaning •... -
Page 13: Waxing The Table Legs And Frame
Ratchet control bar spring Do not lubricate 7 - aCCessOries anD relaTeD PrODUCTs Ferno offers a full line of mortuary service accessories Warning and products. Always follow the instructions packed with accessories. Keep the instructions with this manual. Be... -
Page 14: Parts And Service
Modifying the table can cause injury and damage. Use the table only as designed by Ferno. 8.2 Worldwide To order Ferno parts and for professional repair, contact your Ferno distributor. Your distributor is the only agent authorized by Ferno to manage, service, and repair Ferno products. -
Page 15: Training Record
Model 103 Combination Table Training reCOrD Date ame Training Method MainTenanCe reCOrD Date Maintenance Performed © Ferno-Washington, Inc 234-0037-05 August 2009...