Advertisement
GWP 10
7. Fitting
Fitting the motor housing
1
1. Drive in the two screws (1) [1.0
2. Position the air guide ring (2).
3. Press the armature (3) into the housing.
C-SC_CSSM
Version 1.0
2
+0.4
Nm].
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
.
Tools:
- PH2 cross-tip
screwdriver
Page 31 of 39
Advertisement
