GWP 10
7. Fitting
Fitting the electronics
1
1. Slide the cable grommet (1) onto the cable with plug.
2. Connect the capacitor (2) to the speed setting switch as shown in connection diagram.
3. Connect the cable (3) to the speed setting switch as shown in connection diagram.
C-SC_CSSM
Version 1.0
2
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
.
Tools:
- PH1 cross-tip
screwdriver
Page 35 of 39