Advertisement
GWP 10
7. Fitting
Fitting the gearbox housing
1
1. Press in the sleeve (1).
Always use a new sleeve during each fitting.
2. Insert the dowel pin (2).
3. Place the seal (3) on the intermediate gearbox in the correct position.
Always use a new seal during each fitting.
4. Place the intermediate gearbox (4) on the gearbox housing.
C-SC_CSSM
Version 1.0
2
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
.
4
Tools:
- Arbor press
- Sleeve
~16 mm inner diameter
19 mm outer diameter
Page 28 of 39
Advertisement
