GWP 10
6. Removal
Removing the gearbox housing
1. Pull off the intermediate gearbox (1).
2. Remove the seal (2).
Replace the seal (2) after each removal.
3. Pull out the pin (3).
4. Remove the bush (4).
Replace the bush (4) after each removal.
C-SC_CSSM
Version 1.0
1
2
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
4
.
Tools:
- Combination pliers
Page 17 of 39