Advertisement
GWP 10
7. Fitting
Fitting the housing
1
2
1. Place the gearbox housing (1) on the motor housing (2).
2. Drive in the screw [68 mm] (3) [1.8
3. Secure the two screws [55 mm] (4) [1.8
C-SC_CSSM
Version 1.0
4
3
+0.2
Nm].
+0.2
Nm].
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Tools:
- Torx T20
Page 32 of 39
Advertisement
