Advertisement
GWP 10
6. Removal
Removing the carbon brushes and carbon brush holders
1
1. Loosen the two screws (1) and pull out the stranded wires.
2. Actuate the terminal (2) and simultaneously pull out the stranded wire (3).
3. Remove the cable grommet (4).
C-SC_CSSM
Version 1.0
3
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
2
4
.
Tools:
- PH1 cross-tip
screwdriver
- Slotted screwdriver
(small)
Page 13 of 39
Advertisement
