Advertisement
GWP 10
6. Removal
Removing the carbon brushes
1
1. Lift the spring (1) to one side [on both sides].
2. Pull out the carbon brush (2) [on both sides].
3. Pull off the female push-on connector (3) [on both sides].
4. Pull off the two female push-on connectors (4).
5. Unscrew the respective screw (5).
6. Remove the carbon brush holders.
C-SC_CSSM
Version 1.0
3
2
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
4
.
5
Tools:
- Assembly aid
- Long-nosed pliers
- PH2 cross-tip
screwdriver
Page 11 of 39
Advertisement
