Advertisement
GWP 10
6. Removal
Removing the gear-wheel
1
1. Pull off the grooved ball bearing (1).
2. Press the two gear-wheels [Z=25; Z=38] (2) off the shaft.
C-SC_CSSM
Version 1.0
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
2
.
Tools:
- Drawing-off socket cap
- Chuck cone 16 mm
- Arbor press
- Punch 5 mm
- Sleeve
11 mm inner diameter
20 mm outer diameter
Page 21 of 39
Advertisement
