Advertisement
GWP 10
7. Fitting
Fitting the gearbox
1
1. Press the two gear-wheels [Z=25] (1) onto the shaft.
Press the gear-wheel flush onto the shaft.
2. Press the two gear-wheels [Z=38] (2) onto the shaft.
3. Press the grooved ball bearing (3) onto the shaft.
C-SC_CSSM
Version 1.0
2
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
.
Tools:
- Arbor press
- Punch 6 mm
- Sleeve
7 mm inner diameter
30 mm outer diameter
- Sleeve
19 mm inner diameter
30 mm outer diameter
Page 24 of 39
Advertisement
