Agilent Technologies 5975 Series Operating Manual page 89

4 Operating in EI Mode
Table 9
Action
High Vacuum Pressure
Turbo Pump Speed
Foreline Pressure
MSD Fault Status
Ion Source Temp,
Mass Filter Temp,
CI Reagent
MS parameters cannot be set from the LCP while an online OpenLAB CDS
NOTE
session is connected to the MSD.
Table 10 Network menu
Action
MSD IP via BootP
Gateway IP Address
Subnet Mask
ChemStation IP
GC IP Address
Ping gateway
Ping ChemStation
Ping GC
MS Controller MAC
5975/5977 Series MSD Operating Manual
MS Parameters menu
Description
Only with Micro-Ion vacuum gauge installed.
Displays the turbo pump speed.
Displays the foreline pressure.
Reports a summary fault status code (number) in 'dec' (decimal) and
'hex' (hexadecimal) format covering all possible fault combinations.
o
C Displays and sets the ion source temperature.
o
C Displays and sets the mass filter temperature.
Displays CI reagent gas and flow rate (if installed).
Description
Displays the IP address for the MSD.
Displays the gateway IP address for the MSD.
Displays the subnet mask for the MSD.
Displays the IP address for the
Displays the IP address for the GC.
Checks communication with the gateway.
Displays the IP address for the
Checks communication with the GC.
Displays the MAC address of the SmartCard in the MSD.
OpenLAB CDS PC
.
OpenLAB CDS PC
.
89