Table of Contents
Advertisement
Attention:
The screw driver is equipped with a reversible motor and a left
shut-off clutch, that means in view of from the air inlet side, the
screwdriver is running contrary the clockwise direction.
For reversible tools please note:
Left-hand direction of screwdriver will be started by a remote valve via the
·
air connector on top of the screwdriver and screwdriver will shut off in this
direction at the preset torque.
When providing air to the screwdriver via the connector for right-hand
·
direction (at one side of the screwdriver) screwdriver will rotate at
maximum torque. Screwdriver will start running immediately upon
providing air to this connector.
Make sure to always vent the air connector for the opposite direction
·
(otherwise it will result in reduced performance).
4.1. Range and Exchange of Clutch Spring
The torque range of the DEPRAG Screwdriver is adjustable. Please see a
listing for the torque ranges of the color-coded springs below.
Torque Range of the individual clutch spring:
P
-N
. W
ART
O
IRE
326391
3,4 mm black appx. 2,5 Nm / 22 in.lbs. appx. 5,0 Nm / 44 in.lbs.
323034
3,2 mm violet appx. 2,0 Nm / 18 in.lbs. appx. 4,0 Nm / 35 in.lbs.
323035
2,8 mm green appx. 1,4 Nm / 12 in.lbs
323036
2,2 mm
323037
1,6 mm yellow appx. 0,2 Nm / 2 in.lbs.
All torque values are based on 90-PSI (6,3 bar) air pressure. Torque values
are estimated data which may differ – depending on the type of screw joint.
To avoid loosing individual small parts, it is recommended
to only disassemble the machine on top of a flat work
surface.
-Æ C
OLOR
red
appx. 0,5 Nm / 4,4 in.lbs. appx. 1,5 Nm / 13 in.lbs.
T
-
.
ORQUE
MIN
12
T
-
ORQUE
MAX
appx. 2,5 Nm / 22 in.lbs.
appx. 0,6 Nm / 5,3 in.lbs.
.
Advertisement
Table of Contents
