Table of Contents
Advertisement
Attention:
The screwdriver is furnished with a reversible motor and a
clutch torquing out in right-hand rotation (so that if you look
at the screwdriver from the air inlet side it rotates clockwise).
For reversible tools please note:
•
Right-hand direction of screwdriver will be started by a remote valve via
the air connector on top of the screwdriver and screwdriver will shut off in
this direction at the preset torque.
•
When providing air to the screwdriver via the connector for left-hand
direction (at one side of the screwdriver) screwdriver will rotate at
maximum torque. Screwdriver will start running immediately upon
providing air to this connector.
•
Make sure to always vent the air connector for the opposite direction
(otherwise it will result in reduced performance).
4.1. Range and Exchange of Clutch Spring
The torque range of the DEPRAG Screwdriver is adjustable. Please see a
listing for the torque ranges of the color-coded springs below.
Torque Range of the individual clutch spring:
P
-N
. W
-∅ C
ART
O
IRE
326391
3,4 mm black appx. 2,5 Nm / 22 in.lbs. appx. 5,0 Nm / 44 in.lbs.
323034
3,2 mm violet appx. 2,0 Nm / 18 in.lbs. appx. 4,0 Nm / 35 in.lbs.
323035
2,8 mm green appx. 1,4 Nm / 12 in.lbs
323036
2,2 mm
323037
1,6 mm yellow appx. 0,2 Nm / 2 in.lbs.
All torque values are based on 90-PSI (6,3 bar) air pressure. Torque values
are estimated data which may differ – depending on the type of screw joint.
To avoid loosing individual small parts, it is recommended
to only disassemble the machine on top of a flat work
surface.
T
OLOR
ORQUE
red
appx. 0,5 Nm / 4,4 in.lbs. appx. 1,5 Nm / 13 in.lbs.
12
-
.
MIN
appx. 2,5 Nm / 22 in.lbs.
appx. 0,6 Nm / 5,3 in.lbs.
T
-
.
ORQUE
MAX
Advertisement
Table of Contents
