Barco MatrixPRO User Manual page 53

4. GUI Installation and Operation
Use the following steps to perform a sample sequence:
1.
2.
3.
4.
5.
6.
MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User's Guide
Two presets were configured and loaded earlier in this tutorial. Refer to the
"Preset Save And Recall" section for details.
Be sure that the two "On" boxes for sequences 1 and 2 are checked.
Set the delay for 3 seconds duration for each sequence.
Click the Start key.
Click the Video Switching Tab and watch the input assignments change every 3
seconds. Look at the front panel, and note that the input assignment for output
channel 1 is showing the same activity.
Click the Sequence Tab and stop the sequence.
GUI Operation
43