Barco MatrixPRO User Manual page 26

3. Operation
MatrixPRO Front Panels
3)
4)
5)
6)
7)
Please continue with the
the MatrixPRO Digital product line.
16
Input Crosspoint Selection Buttons
At the right-side of the front panel, the 8x and 16x routers each have a set of eight
input selection switches on the top row. On the 16x only, unshifted input buttons
access inputs 1-8; shifted buttons access inputs 9-16.
Routing operation resembles the industry standard procedure — select a
destination (output), select a source (input) and press TAKE.
TAKE Button
Once input and output selections are made, press TAKE to complete a route.
Menu Navigation Buttons
Two buttons are provided for menu navigation. Within the menu structure:
~
Press SEL to enter a menu, change a parameter and accept a
parameter.
~
Press ESC to exit a menu without making changes, and to navigate up
the menu tree.
Refer to the "Main Menu" section for additional menu navigation instructions.
Output Crosspoint Selection Buttons
At the right-side of the front panel, The 8x and 16x routers each have a set of eight
output selection switches on the bottom row. On the 16x only, unshifted output
buttons access outputs 1-8; shifted buttons access outputs 9-16.
Routing operation resembles the industry standard procedure — select a
destination (output), select a source (input) and press TAKE.
SHIFT Buttons
On the 16x router only, the two SHIFT keys allows access to inputs 9 through 16,
and outputs 9 through 16. When the SHIFT key is pressed for the adjacent row,
the button lights to indicate that inputs (or outputs) 9 through 16 can be accessed.
"Menu Structure" section, which describes all menu displays in
MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User's Guide