GEL DOSAMATIC PP Installation, Use And Maintenance Manual page 59

6.2 Pump settings summary - ALARMS
Should any alarm be starting, in the "Settings summary" menu, a further display will show the number of
alarms which are active. Enter this menu by pressing "RIGHT" key.
The windows displayed indicate the alarms currently active.
ALARM
N° 01
Key
Tasto
STROKES
100 SPM
Key
Tasto
MODE
divide
Key
Tasto
SUPPLY
220 VAC
Key
Tasto
DOSING
0.000 lph
Key
Tasto
input
196 lph
Key
Tasto
Key
Tasto
ALARM
LEVEL
over
ALARM
POWER
ALARM
stroke
ALARM
BATCH
Key
Tasto
Diagram shows all possible alarms.
Active windows show all active alarms.
Level alarm: level probe
indicates that product is
exhausted.
Key
Tasto
Overflow alarm (when using
"Divide", "Multiply", "ppm"
working mode): indicates that
the pump working frequency
flow
is higher than the one
indicated on the rating plate.
Key
Tasto
Power alarm indicates
that power supply is out
of range (from 180 to 270
VAC).
Key
Tasto
Stroke alarm indicates that
the flow rate set on the
pump is higher than the
one indicated on the rating
plate.
Key
Tasto
Batch alarm indicates that
that pump has received an
impulse while working in
Batch mode.
59