Converter and Power Supply are not suitable for use in hazardous locations. Refer to
Chapter 7 for replacement part numbers.
NOTE
Signal Connections (4-to-20 mA )
WARNING: EXPLOSION HAZARD- For Division 2 area, the power supply should
!
be shut down for service or maintenance. If a procedure requires that power remain on,
a hot work permit may be required. Consult your safety specialist.
WARNING
Analyzer Set-Up
Overview of Keypad
The Model 5910 Moisture Analyzer keypad (Figure 3-10) is used to access menus and
sub-menus and system values for the function keys, and to set-up your analyzer param-
eters.
Function keys
Press one of the four function keys to access the main menu for that category as well as
sub-menus and system values.
3-12 | 5910 Moisture Analyzer
4. Replace terminal cover.
ZERO
ALARM
RANGE
CONFIG
Arrow Keys (2, 4, 6, 8)
Number Keys (0 through 9) Enter values. Use the (-) and (.) to enter
Used to define on-demand zero settings,
and initiate a zero cycle.
Used to define alarm output settings.
Used to scale the 4-to-20 mA output in pro-
portion to the mositure concentration.
Used to define device and communication
settings.
Scroll up, down, left, and right through
menu items and system value lists.
negative values or numbers that require a
decimal point.