5.8 Operation with
detergents
Original Instructions
Application of detergents is
NOT possible if an extension
hose is applied.
1. Fill the container with a de-
tergent.
2. Mount the Flexopower Plus
spray lance and adjust it to
low pressure. Turn the 4-in-1
nozzle to pos Low Pressure/
Detergent (see section 5.7).
3. Adjust the dosing regulator
(12) to the re quired vol ume
of detergent (0-5%).
T and XT models:
4-in-1 spray lance
The pressure can be regulated
on the 4-in-1 spray lance.
Low Pressure / detergent
Tornado / high pressure
Wide angle / high pressure
Turbohammer / high pressure
4. Apply the detergent from
below and up wards.
5. Let the detergent act for the
time stated on the packing of
the detergent and fl ush with
pure water or use a brush.
External detergent container
1. Remove the cover with suc-
tion hose from the detergent
container.
2. Mount the cover with suction
hose on the external deter-
gent container.
The cover has a standard thread
and fi ts common detergent con-
tainers. If your container does
not have a standard thread,
detach the fi lter from the suc-
tion hose and remove the cover.
Remount the fi lter in the suction
hose.
Extra detergent hose can be
pulled out of the machine.
15