Do you have a question about the D 130.4 and is the answer not in the manual?
Questions and answers
patrick allain
February 21, 2025
how do I conect my garden hose to my nilfisk D1304
1 comments:
Mr. Anderson
February 21, 2025
To connect a garden hose to your Nilfisk-Advance D 130.4:
1. Check national regulations before connecting to potable water mains and use a back-flow preventer if required. 2. Use a ½" garden hose, 10-25 meters in length. 3. Follow the illustrations in section B of the manual for proper connection. 4. Ensure the quick coupling is properly mounted. 5. Make sure the factory-fitted filter is in place when installing the quick coupling for the first time.
The instruction consists of 3 parts. Part 1:3 Safety Intended Use and Terms of Liability Instructions. Part 2:3 User Guide. Part 3:3 Technical • The C-, D-, E- and P-series have been developed Data and Declaration. for domestic cleaning pur poses only and for use in an upright position.
• The operator and any one in the immediate vicinity Pairing of spray handle and machine of the site for cleaning should take action to pro- C-PG and D-PG series only. After battery insert, D1.1, tect oneself from being struck by debris dislodged you have 2 min.
Page 4
Part 2:3 User Guide Original instructions...
Part 3:3 - Technical Data and Declaration of Conformity Technical Data D 130.4 D 140.4 E 130.3 E 140.3 E 145.3 E 150.1 D-PG 130.4 D-PG 140.4 Electric specifications Unom 230-240 V fnom 50 Hz Pnom 2.1 kW 2.4 kW 2.0 kW...
Need help?
Do you have a question about the D 130.4 and is the answer not in the manual?
Questions and answers
how do I conect my garden hose to my nilfisk D1304
To connect a garden hose to your Nilfisk-Advance D 130.4:
1. Check national regulations before connecting to potable water mains and use a back-flow preventer if required.
2. Use a ½" garden hose, 10-25 meters in length.
3. Follow the illustrations in section B of the manual for proper connection.
4. Ensure the quick coupling is properly mounted.
5. Make sure the factory-fitted filter is in place when installing the quick coupling for the first time.
This answer is automatically generated