Clatronic DVD 552 HC Instructions For Use Manual page 39

DVD 552 HC - GB 21.03.2003 8:58 Uhr
Search backwards:
FR
Display:
To continue with playback, press » II PLAY/PAUSE«
button 3/38.
Note:
The search mode function is not possible for MP3 CDs.
Other playback functions
Displaying information on the play time:
The play time of the CD or the title appears on the screen
and in display 10.
By repeatedly pressing »DISPLAY« button 34 during
playback, you can switch-over between the following dis-
play of:
- elapsed time of the title
- remaining play time of the title
- elapsed time of the CD
- remaining play time of the CD
Repeat functions
The following repeat functions (REPEAT) are available
when playing back a CD:
- continuous repetition of all titles of a CD
- continuous repetition of the individual titles of a CD
- continuous repetition of a particular passage of a title
on the CD.
During playback, press »REPEAT« button 25 once or re-
peatedly. You have the following possibilities:
Screen: Display:
REP. ONE REPEAT 1
REP. ALL REPEAT
REPEAT OFF - - -
To repeat a particular title continuously, proceed as follo-
ws: Press »A-B« button 26 at the beginning of the desi-
red passage. If the end of the passage is reached, then
Device configuration (setup)
You can adapt the following options in the SETUP MENU-
MAIN PAGE to your individual requirements. To do this,
the device must be switched on in DVD operating mode.
You can check which changes are required using the fol-
lowing table.
Menu display:
TV-Display BILDFORMAT
Seite 39
FR x 1-4 PLAY
Function:
Repeats the
current title
Repeats all titles
on the CD
Repeat function
is off
SPECIAL FUNCTIONS
Factory setting:
NORMAL / LB
re-press »A-B« button 26. The following appears in dis-
play unit 10:
Playback will be continued as normal by re-pressing
»A-B« button 26.
Note: Points A and B must be within a title.
Programme memory
You can store and play back up to 99 titles in any order. If
you try to programme more than 99 titles then a FULL
message is displayed in display 10.
Note:
Title programming is not possible for MP3 CDs.
1. In stop mode, you can switch to programming mode
by pressing »PROG« button 27.
2. Enter the required title using the numeric keys »1-0«
19. This title is then stored on the 1st programme posi-
tion and the memory automatically switches to the 2nd
programme position.
3. Enter the remaining titles using the numeric keys
»1-0« 19.
Note: When selecting a multi-digit title using »>10«
button 19, first select the tens position and then enter
the second position with »1-0« 19.
When all titles have been stored, press » II PLAY/-
PAUSE« button 3/38 to play back. When the PROG dis-
play lights up, then the programmed sequence can be
played back again at any time by pressing » II PLAY/
PAUSE« button 3/38.
Clearing the programming:
If the CD player is in stop position, then the entire pro-
gramming is cleared by pressing »í STOP« button 2/22.
Selecting the picture format:
SETUP MENU-MAIN PAGE GENERAL PAGE
GENERAL PAGE
TV DISPLAY
VIDEO OUT
OSD LANG
MAIN PAGE
TV DISPLAY
NORMAL/PS
NORMAL/LB
16:9
39