Quick Steps For Windows Pc Operation - FLIR SV87–KIT User Manual

5
Quick Steps
13. The Standalone communication is now operational, and the system is
ready for adding sensors; see Section 9, Mobile App.

5.2 Quick Steps for Windows PC Operation

For in-depth Windows app instructions, please refer to Section 10.
1. Connect the Windows PC to the local Wi-Fi server network.
2. Download, install and open the Windows app.
Link to app:
3. The user name, password, IP address, and port number are shown on the
app's opening screen.
4. If gateways have been connected before, you'll see them on the gateway
list in the app. To export data in .csv format from an archived or active
gateway, click the Export button on the opening app screen.
5. Plug the GW65 into an AC power source.
6. The blue (power) LED and amber (communications) LED will light. The
communications LED is amber when not communicating to the Wi-Fi net-
work. When communication is established, the LED will turn green.
7. Download, install, and open the mobile app on your smart device, and se-
lect Local Server from the opening screen. For Android devices use the
Google Play store and for iOS devices go to the App Store to obtain the
mobile app.
#NAS100051; r. AC/76460/77189; en-GB
https://support.flir.com/remote monitoring.
13