Table of Contents
Advertisement
5
Quick Steps
17. The gateway that was powered up earlier in this procedure will appear in
the mobile app. Tap the gateway name.
18. A list of Wi-Fi networks will appear, tap your network's name.
19. When prompted, type the Wi-Fi network password and then tap NEXT.
When communication is successful, press NEXT again to continue.
20. The gateway that you plugged in earlier should now appear on the Win-
dows app gateway list. Click the Refresh button and repeat these steps if
you do not see the gateway on the list. Contact FLIR if issues persist.
21. When the gateway appears on the list, you are ready to add sensors, as
explained in Section 9, Mobile App.
#NAS100051; r. AC/76460/77189; en-GB
17
Hide quick links:
Advertisement
Table of Contents
