Table of Contents
Advertisement
9
Mobile App Screen Set
2. Tap Local Server to configure a system using both a Windows PC and a
mobile device, tap Standalone to configure a system using a mobile device
only, or tap Historical sensors to review systems configured earlier.
3. If you're running in 'Local Server' mode, tap + Add Server to add a new
server, or tap a server previously configured (if any). If you're running in
'Standalone' mode, the server screens will not appear.
4. Enter server credentials and tap Continue.
5. Tap + Add gateway to add a new gateway or tap a gateway, previously
configured, from the list.
6. Read the informational screen and tap Start.
7
8
9
10
11
12
Rout er 1
Type Her e
7. Read the informational screen and tap Connect.
8. Tap the connected gateway from the list.
9. Read the informational screen and tap Continue.
10. Tap a network from the list or tap + Other Network to add a new one.
11. Type a network password and tap NEXT.
12. Tap NEXT. If connection fails, check credentials. Contact FLIR if issues
persist.
31
#NAS100051; r. AC/76460/77189; en-GB
Hide quick links:
Advertisement
Table of Contents
