9
Mobile App Screen Set
31. Tap Add Alarm configure alarms. Tap the UNITS icon to edit the unit of
measure. Tap Continue to skip the alarm configuration.
32. Select an alarm Type from the menu. Tap NEXT.
33. Set the alarm Thresholds. Note that when you select an ISO Class, the
alarm threshold fields are automatically populated according to the ISO
108616–1 standard (you can customize if desired). Tap Save.
34. Tap Add Alarm to add another alarm, or tap Continue.
35. Select an alarm type from the menu. Tap NEXT.
36. Set alarm thresholds, Tap Save.
37. Edit alarm configurations or tap Continue.
38. Edit alarm units of measure and tap Next or Cancel.
39. Tap Install Sensors or continue editing by tapping the pencil icons.
40. Click the arrow to expand the installed sensor information box.
41. Tap Finish Setup.
42. Tap Local Server or Standalone to switch between modes. Tap an instal-
lation from the list to view measurement data.
34
#NAS100051; r. AC/76460/77189; en-GB