Isdn Bri Trunking - Nortel Communication Server 1000S Installation And Configuration Manual

Table 12
Hardware requirements for line and packet data applications (Part 2 of 2)
Hardware
ISDN BRI
terminals
Terminal adapters
Network
termination

ISDN BRI trunking

Product code
Required for line applications only.
M5317TDX
M5000TD-1
Required if connecting non-BRI terminals to the ISDN BRI line interface.
Required for conversion from a U to and S/T interface.
Note: ISDN BRI trunking is not supported in North America.
Table 13 on page 56
trunking.
ISDN Basic Rate Interface
Configuring ISDN BRI hardware
Description
Proprietary terminal equipped with voice and data
transmission options and a hands-free feature;
supports B-channel and D-channel packet data.
ISDN Terminal Adapter provides a connection to an
analog telephone and supports circuit-switched or
packet data; supports B-channel and D-channel packet
data.
Any other terminal deemed compatible by Nortel
Networks.
ISDN network termination unit (NT1), including NT1
standard power supply. Two cables are provided with
the NT1 power supply unit:
• 178 mm (7 in.) cable for connection between the
power supply and the NT1 unit
• captive power cord for connection to an AC power
outlet
lists the hardware required to configure ISDN BRI
Page 55 of 120
Installation and Configuration