Generating Traffic Reports; Contents; Introduction - Nortel Communication Server 1000S Installation And Configuration Manual

Generating traffic reports

Contents

Introduction

This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This chapter describes how to generate traffic reports to verify that the traffic
generated during voice and data transmission testing has been stored by the
system and can be printed on demand. To verify traffic generated during
acceptance testing, use the following command:
INVS (options)*
The asterisk (*) denotes that the ENTER key must be pressed after the desired
option numbers are entered.
Reports are generated using one or more of the following option numbers.
Option
1 Network traffic report
11 ISDN BRI MISP and/or BRSC traffic
report
12 ISDN BRI MISP and/or BRSC
D-channel management messages
report
ISDN Basic Rate Interface
Meaning
Installation and Configuration
Page 117 of 120
117