Installing Isdn Bri Hardware; Contents; Installing Isdn Bri Hardware For Line Applications - Nortel Communication Server 1000S Installation And Configuration Manual

Installing ISDN BRI hardware

Contents

Installing ISDN BRI hardware for line applications

This section contains information on the following topics:
Installing ISDN BRI hardware for line applications. . . . . . . . . . . . . . .
Installing ISDN BRI hardware for trunk applications . . . . . . . . . . . . .
Selecting the card slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing the module cover for card installation . . . . . . . . . . . . . .
Installing the MISP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the clock reference on the SILC . . . . . . . . . . . . . . . . . . . .
Installing the SILC and the UILC . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the system to the Main Distribution Frame (MDF) . . .
Cross-connecting the Main Distribution Frame (MDF). . . . . . . . . .
Card location forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The following lists the procedures for installing ISDN BRI hardware for line
applications. The system must already be installed and operating according to
the instructions in Communication Server 1000M and Meridian 1:
Large System Installation and Configuration (553-3021-210) before
performing these procedures.
For a successful installation, perform these procedures in the order listed
below:
1 Select the card slots where the ISDN BRI cards will be located.
2 Remove the module cover for card installation.
ISDN Basic Rate Interface
Page 17 of 120
Installation and Configuration
17
44
44
44
44
45
48
48
48
50